Our Bead ST model has been designed specifically to bead 16swg stainless steel seamless or welded tube. An elegant design, simple to operate, an extremely reliable useful tool. Useful Tools are a supplier of innovative tools such as mandrel pipe benders and hand beading tools for use in the plumbing and engineering industries as well as intercooler cores.
Our useful tools have been supplied to customers all over the UK and worldwide and proved very useful tools. Contact Useful Tools now for further information about our quality time saving tools and equipment. Simple and easy to use, this tool is called a three in one because there are three ways of using it: With the machine gripped in a vice use the handle provided to turn the primary shaft and form a bead With the machine gripped in a vice use an electric or battery drill to turn the primary shaft and form a bead If the pipe to be beaded is in a static situation, then roll the machine around the pipe to form a bead Video of the beading tool in action!
Using a handle Using a drill Moving around the pipe Fast beading! Example beading 4" dia. In stock orders placed before 3 pm Central Time ship same day! Popular Searches ». The Original Bead Form tools by Kramer Metal Fab are designed to form a pressure hose bead in various types of metal tubing. Useful for fuel lines, radiator and cooling lines, intercooler and turbo piping or anywhere a rubber hose needs to be clamped on to a metal tube.
Choose a powered bead roller for tubing when production demands higher volumes. Expander tools can also be used to form pressure beads in tubing. A fast effective method useful for heavy wall tubing beyond. These machines are available in handheld or benchtop models with optional bead tooling. You've Selected:. Bead Form. Mittler Bros. Attachments main unit.
Remember Safety First. Do it at your own Risk! Or make a jig at your bench vise see the sketch or file Mount a piece of angle-iron, in the vise, Mark the point of cut at the stock steel Place the steel into the angle-iron, so as the cutting point to be just next to end of the angle-iron Use a clamp and a piece of steel and create a stop at left side of angle-iron, so as, your stock steel to can't move to the left.
Use a file, to smoothen the profiles. Then cut a piece 70mm length of this rod for bushing's pivot. Make a handle of square tube 20x20x1.
Heat up a piece of plastic tube and pass it onto the tube. Mark a center line for the guides. This line must be at the whole length of tube at 16mm from back side to front. The center of first guide must be at a distance 42mm from the center of the pivot hole. All guides must have the same distance 50mm between them. Mark and then Center punches all points. The Main unit is almost ready. To attaching the bending unit to main unit needs to make a small base for the pivot.
Insert the pivot into the nut, adjust, and then fasten the screw. Pass the pivot into the holes at the main unit from down side. Weld the nut to the main unit. Please follow the process on photos, I think that is easier than the text. Mark a line at 8mm from the front side, at flat bar. Do a center punch mark over the line at 10mm from the left edge do a second at 32mm and a third at 82mm.
Turn the flat bar upside down, using a countersink or a bigger drill bit, do the first hole conical. Weld and grind the weld so to be smooth. The tool is ready. Tested and the results are prety good.
0コメント